Tulitta, home Arrange a private viewing
Arrange a private viewing

Quiet strength,
made tangible.

Fine jewellery shaped by palm geometry in gold, malachite, and light.

Arrange a private viewing Discover the collection

A hand resting at the nape of a neck, wearing the Tulitta Mixed-Gold Ring Stack: three slim bands worn together, rose gold with faceted relief, white gold set with one row of round diamonds, and yellow gold in a rope twist.

A seven-piece study in facet, twist, circle, and light.

The palm endures through heat, movement, and time. Tulitta translates that quiet strength into layered facets, rope twists, open circles, and disciplined points of light. The reference is never simply illustrated; it is built into the structure of each piece.

The collection is called Palme: one material vocabulary, repeated with discipline across seven pieces.

The Tulitta Circle Necklace: a small open rose-gold circle with palm-derived faceted relief, set with two green marquise malachite cabochons, the smaller one high across the inner opening, on a fine gold chain.

Circle Necklace

Circle, marquise, facet

A small rose-gold circle carries two asymmetrical marquise malachites. One chain enters through the top loop; the other disappears behind the larger stone, leaving the geometry uninterrupted.

Diameter
approximately 24 mm
Metals
rose gold circle, yellow-gold chain
Stone
two marquise-cut malachite cabochons
Surface
palm-derived faceted relief between clean inner and outer rails
An adult woman in a black V-neck top wearing the Tulitta Lariat Necklace: a rose-gold chain gathered through a compact three-loop slider below the collarbone, the two chains below it descending to tapered rose-gold caps at clearly different lengths.
The slider gathers the chain below the collarbone; the two tails fall to tapered caps at staggered lengths.
The Tulitta Mixed-Gold Ring Stack on a pale grey field: three slim bands side by side, rose gold with raised geometric facets, white gold set with one continuous row of round white diamonds, and yellow gold in a dimensional rope twist.

One ring holds the whole vocabulary.

Mixed-Gold Ring Stack

Facet, light, twist

Three bands, three surfaces, one composition. Every other piece in Palme translates one of them.

Bands
three, worn together
Surfaces
faceted relief, one line of pavé, rope twist
Metals
rose gold, white gold, yellow gold

One closure, held at two scales.

The Tulitta Large Toggle Bracelet laid open in a circle on a grey field: weighty elongated oval links in yellow gold, closed by a faceted open ring and a separate rope-twist T-bar with a flared cap at each end.

Large Toggle Bracelet

Facet and twist

Weighty oval links meet a faceted open ring and a rope-twist T-bar, the Tulitta closure at its strongest scale.

The Tulitta Fine Toggle Bracelet shown open on a near-white field: slim elongated oval links in yellow gold, a petite faceted open ring at one end and a rope-twist T-bar with two flared caps at the other.

Fine Toggle Bracelet

Facet and twist

The same toggle language reduced to a lighter line: slender oval links, a petite faceted ring, and a twisted bar.

Both close the same way and carry no other hardware: one faceted open ring, one rope-twist T-bar with a flared cap at each end, no secondary clasp. What changes is weight, and it is meant to be obvious.

The back of an adult woman's head and shoulder. High on the ear sits the Tulitta Ear Cuff: two close bands, one rose-gold rope twist and one set with a single row of diamonds, joined by one fine gold chain to a pear-shaped diamond stud in the lobe.
The Ear Cuff at the scale it is actually worn: one cuff high on the ear, one fine chain, one pear diamond in the lobe.

Two intimate translations.

The Tulitta Ear Cuff with Chained Stud on a warm off-white field: an upper cuff of two adjacent bands, rose-gold rope twist beside a single row of diamonds, joined by one fine gold chain to a pear-shaped white diamond in a three-prong warm-gold setting.

Ear Cuff with Chained Stud

Twist and light

A pear diamond and a close two-band cuff are joined by one fine chain. Twist and pavé trace the ear in a compact, precise gesture.

The Tulitta Jacket Earring on a warm off-white field: a pear-shaped white diamond held by three rose-gold prongs, with three compact forms directly beneath it, a faceted rose-gold loop on the left, a narrow pavé-set bar at the centre, and a rose-gold rope twist on the right.

Jacket Earring

Facet, light, twist

A pear diamond sits above three tiny forms: Tulitta facets, a line of pavé, and rose-gold twist. Shown here at object scale; on the ear the jacket stays a compact accent beneath the stud, never a drop.

Facet. Twist. Light.

The collection repeats a small vocabulary with discipline. A faceted band becomes a pendant surface, a toggle ring, and the edge of an earring. Rope twist moves from ring to closure to cuff. A single diamond line gives structure rather than spectacle.

Close view of the Tulitta Lariat Necklace slider: three separate loops stacked as one compact unit, a rose-gold rope twist above, a white-gold band set with one row of round diamonds in the middle, and a rose-gold band of square faceted relief below, with two rose-gold chains entering the top and two leaving the base.
The lariat's slider repeats the ring stack at a smaller radius: rope twist, one line of diamonds, faceted relief.
Facet
Ring band, Circle Necklace surface, both toggle rings, the jacket earring's left loop, the lariat's lower loop.
Twist
Ring band, both bracelet T-bars, the ear cuff's upper band, the jacket earring's right loop, the lariat's upper loop.
Light
Ring band, the ear cuff's set band, the jacket earring's centre bar, the lariat's middle loop.
The complete Tulitta Lariat Necklace: a long rose-gold chain gathered through a compact three-loop slider, with two chains passing through it and two staggered tails of different lengths, each finished with a tapered cap.

Lariat Necklace

Facet, light, and twist at once

The ring stack reappears at a smaller radius, becoming a three-loop slider for two staggered chains and tapered ends.

Slider
three loops: rope twist, one row of diamonds, faceted relief
Chains
two passages through the slider, two staggered tails
Ends
one tapered cap on each tail
Metals
rose gold, white gold

The pieces reward a closer look.

Tell us which piece you would like to see. Viewings are arranged individually, with the pieces in front of you.

Specifications
materials, dimensions, and fit confirmed for each piece
Price
confirmed at enquiry

Fields marked required are needed to reply.

Piece two of seven

Circle Necklace

Circle, marquise, facet

A small open-centred rose-gold circle with a palm-derived faceted surface and exactly two malachite marquises, on a fine yellow-gold chain.

The Tulitta Circle Necklace: a small open rose-gold circle with palm-derived faceted relief, set with two green marquise malachite cabochons, the smaller one high across the inner opening, on a fine gold chain.
The whole object, on the field the campaign uses.
The Tulitta Circle Necklace against a dark ground, seen close: the rose-gold circle carries raised faceted relief between a clean inner and outer rail, the smaller malachite marquise crosses the inner opening at the upper left and the larger sits at the upper right, a small attachment loop sits at the top, and the two yellow-gold chains leave at different points.
The construction reference: faceted rails, asymmetric stones, and the two-point chain routing.

Construction

Diameter
approximately 24 mm
Circle
one open rose-gold circle, faceted relief between clean inner and outer rails
Stones
two marquise-cut malachite cabochons, deliberately unequal in scale
Placement
the smaller marquise sits high, crossing the inner opening; the larger sits opposite it
Chain
two-point routing: one chain through the top loop, one behind the larger stone, so the face stays uninterrupted

The pendant's approximately 24 mm is the one published dimension. Fit and chain length are confirmed at enquiry.

Arrange a private viewing

Piece one of seven

Mixed-Gold Ring Stack

Facet, light, twist

Three distinct slim bands worn as one composition. Facet, light, and twist together form the collection's clearest material alphabet.

The Tulitta Mixed-Gold Ring Stack on a pale grey field: three slim bands side by side, rose gold with raised geometric facets, white gold set with one continuous row of round white diamonds, and yellow gold in a dimensional rope twist.
The three bands side by side, each readable on its own.
The Tulitta Mixed-Gold Ring Stack standing upright against a dark ground in three-quarter view: the rose-gold band's raised rhombic facets, the white-gold band's single continuous row of round diamonds, and the yellow-gold band's dimensional rope twist are each visible in section.
Upright, where the facet relief, the single pavé line, and the twist read as three separate rings.
A hand resting at the nape of a neck, wearing the Tulitta Mixed-Gold Ring Stack: three slim bands worn together, rose gold with faceted relief, white gold set with one row of round diamonds, and yellow gold in a rope twist.
Worn, at the scale the three bands actually occupy.

Construction

Bands
exactly three, worn together, each readable as a separate ring
Facet
rose gold, raised geometric relief
Light
white gold, one continuous row of round white diamonds
Twist
yellow gold, dimensional polished rope
Role
the reference every other piece translates: the lariat's slider repeats all three at a smaller radius

Ring sizes, whether bands are available separately, and metal specification are confirmed at enquiry.

Arrange a private viewing

Piece three of seven

Large Toggle Bracelet

Facet and twist

A substantial yellow-gold bracelet of weighty elongated oval links, closed by a sculptural toggle and nothing else.

The Tulitta Large Toggle Bracelet laid open in a circle on a grey field: weighty elongated oval links in yellow gold, closed by a faceted open ring and a separate rope-twist T-bar with a flared cap at each end.
The complete bracelet, every link visible.
The Tulitta Large Toggle Bracelet against a dark ground, laid in a circle with the closure fastened: the rope-twist T-bar has been passed through the faceted open toggle ring, and a flared cap is visible at each end of the bar.
The closure fastened: the twisted bar passed through the faceted ring, no secondary clasp anywhere on the chain.

Construction

Links
weighty elongated ovals, uniform yellow gold
Closure
one open toggle ring carrying the faceted Tulitta geometry
Bar
one separate rope-twist T-bar, a flared cap at each end
Hardware
no secondary clasp, no tag, no charm
Stones
none; this piece is gold alone

No worn view is published for this piece. Bracelet sizes and dimensions are confirmed at enquiry.

Arrange a private viewing

Piece four of seven

Fine Toggle Bracelet

Facet and twist

The same closure at daily scale: slim open-oval links set in alternating planes, and a petite version of the Tulitta toggle.

The Tulitta Fine Toggle Bracelet shown open on a near-white field: slim elongated oval links in yellow gold, a petite faceted open ring at one end and a rope-twist T-bar with two flared caps at the other.
Open, with the closure separated at either end.
The Tulitta Fine Toggle Bracelet against a dark ground, laid open in a curve: slim yellow-gold oval links run between a petite faceted open toggle ring at one end and a rope-twist T-bar at the other, each element separate and unfastened.
The construction reference: a visibly finer chain and a smaller closure than the large bracelet carries.
An adult woman's wrist wearing the Tulitta Fine Toggle Bracelet fastened, the petite faceted ring and rope-twist T-bar sitting flat against the skin beside an ivory sleeve.
Fastened at daily scale, ring and bar lying flat.

Construction

Links
slim elongated open ovals, set in alternating planes
Closure
one petite faceted open toggle ring
Bar
one rope-twist T-bar with two flared caps
Scale
a visibly finer chain and smaller closure than the Large Toggle Bracelet
Hardware
no secondary clasp, no stones

Bracelet sizes and dimensions are confirmed at enquiry.

Arrange a private viewing

Piece five of seven

Ear Cuff with Chained Stud

Twist and light

A small upper-ear cuff joined by one fine gold chain to a pear-shaped diamond stud. Two of the collection's three surfaces, at their smallest.

The Tulitta Ear Cuff with Chained Stud on a warm off-white field: an upper cuff of two adjacent bands, rose-gold rope twist beside a single row of diamonds, joined by one fine gold chain to a pear-shaped white diamond in a three-prong warm-gold setting.
The whole piece: one cuff, one chain, one stud.
The Tulitta Ear Cuff with Chained Stud against a dark ground: the open upper cuff at the top right is built from two adjacent bands, one rose-gold rope twist and one set with a single row of round diamonds, and a single fine gold chain curves down to a pear-shaped white diamond held in three warm-gold prongs.
The construction reference: the twist and the set band read as a tight pair, and the three-prong setting is visible.
The back of an adult woman's head and shoulder. High on the ear sits the Tulitta Ear Cuff: two close bands, one rose-gold rope twist and one set with a single row of diamonds, joined by one fine gold chain to a pear-shaped diamond stud in the lobe.
Worn: the cuff high on the ear, the stud in the lobe, one chain between.

Construction

Cuff
two adjacent bands: one rose-gold rope twist, one diamond-set
Chain
exactly one fine gold chain
Stud
one pear-shaped white diamond in a three-prong warm-gold setting
Worn
the cuff sits high on the ear, the stud in the lobe
Twist
derived from the ring stack's rope band; the earlier malachite version was withdrawn

Whether the ear pieces are offered singly or as a pair, and their exact dimensions, are confirmed at enquiry.

Arrange a private viewing

Piece six of seven

Jacket Earring

Facet, light, twist

A compact pear-diamond stud with a three-part jacket immediately beneath it, holding all three surfaces in one very small piece.

The Tulitta Jacket Earring on a warm off-white field: a pear-shaped white diamond held by three rose-gold prongs, with three compact forms directly beneath it, a faceted rose-gold loop on the left, a narrow pavé-set bar at the centre, and a rose-gold rope twist on the right.
The whole piece at object scale.
The Tulitta Jacket Earring against a dark ground, seen large: a pear-shaped white diamond held in three rose-gold prongs sits above three close forms, a rose-gold loop of faceted relief on the left, a narrow bar set with round diamonds at the centre, and a rose-gold rope-twist loop on the right, with the left and right elements curling inward.
A macro of the construction. The piece is far smaller on the ear than this magnification suggests.
A close side view of an adult woman's ear wearing the Tulitta Jacket Earring. The pear diamond and the three small forms beneath it together stay shorter than the earlobe.
The true scale: stud and jacket together stay shorter than the lobe.

Construction

Stud
one pear-shaped white diamond, three rose-gold prongs
Jacket
exactly three compact forms, in facet, pavé, twist order
Form
the outer two curl inward as small open loops; the centre bar is straighter and diamond-set
Spacing
clear space between the pear and the jacket, kept close and compact
Scale
a compact accent beneath the stud, never a drop

Whether the ear pieces are offered singly or as a pair, and their exact dimensions, are confirmed at enquiry.

Arrange a private viewing

Piece seven of seven

Lariat Necklace

Facet, light, and twist at once

A long adjustable lariat gathered through a compact three-loop slider, with two staggered tails and a tapered cap on each.

The complete Tulitta Lariat Necklace: a long rose-gold chain gathered through a compact three-loop slider, with two chains passing through it and two staggered tails of different lengths, each finished with a tapered cap.
The complete necklace, both tails at their true lengths.
Close view of the Tulitta Lariat Necklace slider: three separate loops stacked as one compact unit, a rose-gold rope twist above, a white-gold band set with one row of round diamonds in the middle, and a rose-gold band of square faceted relief below, with two rose-gold chains entering the top and two leaving the base.
The slider: the ring stack repeated at a smaller radius, twist over light over facet.
An adult woman in a black wrap top wearing the Tulitta Lariat Necklace. The three-loop slider sits below the collarbone and the two chain tails hang at clearly different lengths, each ending in a tapered rose-gold cap.
Worn: the slider below the collarbone, the tails deliberately unequal.

Construction

Slider
three loops at reduced radius: rose-gold rope twist, white-gold single-row pavé, rose-gold faceted relief
Passages
two chains pass through the slider
Tails
two, held at deliberately different lengths
Caps
one tapered cap on each tail
Chain
one continuous necklace chain, no rear clasp and no pendant

Chain length and adjustability range are confirmed at enquiry.

Arrange a private viewing